How Do I Convert kg/h of Steam to ton/h?

To convert a steam flow rate from kilograms per hour (किलो/ता) to metric tons per hour (टी/एच), divide the kg/h value by 1,000.

Steam flow (टी/एच) = Steam flow (किलो/ता) ÷ 1,000

उदाहरणार्थ:

5,000 kg/h ÷ 1,000 = 5 टी/एच

म्हणून, a steam boiler producing 5,000 kg of steam per hour has a steam capacity of 5 metric tons per hour.

kg/h to ton/h Steam Conversion Table

The conversion is linear because 1 metric ton = 1,000 किलो. The U.S. National Institute of Standards and Technology (NIST) also defines 1 metric ton (ट) म्हणून 1,000 kilograms.

How Do I Convert ton/h Back to kg/h?

For the reverse conversion, multiply metric tons per hour by 1,000:

Steam flow (किलो/ता) = Steam flow (टी/एच) × 1,000

उदाहरण:

6 t/h × 1,000 = 6,000 किलो/ता

So a 6 t/h industrial steam boiler is rated to produce 6,000 kg/h of steam at its specified rated conditions.

Is 1 ton/h of Steam Always 1,000 किलो/ता?

Yes—if “ton” means a metric ton (tonne).

1 metric ton/hour = 1,000 kg/hour

तथापि, the word “ton” can be ambiguous in international projects.

For industrial boiler specifications expressed as टी/एच, confirm that the supplier and buyer are both referring to metric tonnes per hour.

This is especially important for international RFQs, where “10 ton boiler” should not be used without clearly defining the unit.

Does Steam Pressure Change the kg/h to t/h Conversion?

नाही.

If you are converting only the mass flow rate, steam pressure and temperature do not change the basic conversion:

1,000 kg/h = 1 टी/एच

Pressure and temperature do matter when calculating steam enthalpy, thermal power, इंधन वापर, pipe sizing and other engineering parameters, but they do not change the mass conversion between kg/h and metric t/h.

Is Boiler Capacity in t/h the Same as Steam Flow Rate?

साठी औद्योगिक स्टीम बॉयलर, rated capacity in t/h commonly describes the mass of steam the boiler is designed to generate per hour at specified operating conditions.

उदाहरणार्थ:

• 1 t/h = 1,000 किलो/ता
• 2 t/h = 2,000 किलो/ता
• 5 t/h = 5,000 किलो/ता
• 10 t/h = 10,000 किलो/ता
• 20 t/h = 20,000 किलो/ता

तथापि, boiler selection should not be based on the converted number alone.

Actual boiler sizing should also consider:

• minimum steam demand;
• normal steam demand;
• peak steam demand;
• कार्यरत दबाव;
• steam temperature;
• इंधन;
• operating hours;
• and expected future load.

If you are selecting a new boiler, आमचे पहा Industrial Steam Boiler Buying Guide for a complete capacity, दबाव, fuel and TCO selection process.

जलद उत्तर

How do I convert kg/h of steam to ton/h?

Divide the steam flow in kg/h by 1,000:

t/h = kg/h ÷ 1,000

म्हणून:

• 500 kg/h = 0.5 टी/एच
• 1,000 kg/h = 1 टी/एच
• 5,000 kg/h = 5 टी/एच
• 10,000 kg/h = 10 टी/एच
• 20,000 kg/h = 20 टी/एच

Always confirm that “ton” means metric ton (tonne) when preparing an international industrial boiler specification or quotation.