How Do I Convert kg/h of Steam to ton/h?

To convert a steam flow rate from kilograms per hour (کلوگرام/ایچ) to metric tons per hour (ویں), divide the kg/h value by 1,000.

Steam flow (ویں) = Steam flow (کلوگرام/ایچ) ÷ 1,000

مثال کے طور پر:

5,000 kg/h ÷ 1,000 = 5 ویں

لہذا, a steam boiler producing 5,000 kg of steam per hour has a steam capacity of 5 metric tons per hour.

kg/h to ton/h Steam Conversion Table

The conversion is linear because 1 metric ton = 1,000 کلوگرام. The U.S. National Institute of Standards and Technology (NIST) also defines 1 metric ton (t) جیسا کہ 1,000 kilograms.

How Do I Convert ton/h Back to kg/h?

For the reverse conversion, multiply metric tons per hour by 1,000:

Steam flow (کلوگرام/ایچ) = Steam flow (ویں) × 1,000

مثال:

6 t/h × 1,000 = 6,000 کلوگرام/ایچ

So a 6 t/h industrial steam boiler is rated to produce 6,000 kg/h of steam at its specified rated conditions.

Is 1 ton/h of Steam Always 1,000 کلوگرام/ایچ?

Yes—if “ton” means a metric ton (tonne).

1 metric ton/hour = 1,000 kg/hour

البتہ, the word “ton” can be ambiguous in international projects.

For industrial boiler specifications expressed as ویں, confirm that the supplier and buyer are both referring to metric tonnes per hour.

This is especially important for international RFQs, where “10 ton boiler” should not be used without clearly defining the unit.

Does Steam Pressure Change the kg/h to t/h Conversion?

نہیں.

If you are converting only the mass flow rate, steam pressure and temperature do not change the basic conversion:

1,000 kg/h = 1 ویں

Pressure and temperature do matter when calculating steam enthalpy, thermal power, ایندھن کی کھپت, pipe sizing and other engineering parameters, but they do not change the mass conversion between kg/h and metric t/h.

Is Boiler Capacity in t/h the Same as Steam Flow Rate?

کے لئے صنعتی بھاپ بوائلر, rated capacity in t/h commonly describes the mass of steam the boiler is designed to generate per hour at specified operating conditions.

مثال کے طور پر:

• 1 t/h = 1,000 کلوگرام/ایچ
• 2 t/h = 2,000 کلوگرام/ایچ
• 5 t/h = 5,000 کلوگرام/ایچ
• 10 t/h = 10,000 کلوگرام/ایچ
• 20 t/h = 20,000 کلوگرام/ایچ

البتہ, boiler selection should not be based on the converted number alone.

Actual boiler sizing should also consider:

• minimum steam demand;
• normal steam demand;
• peak steam demand;
• کام کرنے کا دباؤ;
• steam temperature;
• ایندھن;
• operating hours;
• and expected future load.

If you are selecting a new boiler, ہمارے دیکھیں Industrial Steam Boiler Buying Guide for a complete capacity, دباؤ, fuel and TCO selection process.

فوری جواب

How do I convert kg/h of steam to ton/h?

Divide the steam flow in kg/h by 1,000:

t/h = kg/h ÷ 1,000

لہذا:

• 500 kg/h = 0.5 ویں
• 1,000 kg/h = 1 ویں
• 5,000 kg/h = 5 ویں
• 10,000 kg/h = 10 ویں
• 20,000 kg/h = 20 ویں

Always confirm that “ton” means metric ton (tonne) when preparing an international industrial boiler specification or quotation.